Ergonomically move and lift servers and other IT equipment
safely, efficiently and effectively.
ServerLift is designed to meet strict computer center device moving and lifting requirements by providing a data center solution to install computers and other equipment.
Mast Extension
The mast of the Server Lifts telescopes to 8 feet (2.4 m), enabling servers to be lifted to the up most rack locations. With a stowed (lowered) height of just 5 foot, 10 inches (1.7 m), provides adequate clearance for access through standard doorways.
Built-In Recharger
Every ServerLift comes with a built-in recharging unit for its 12-volt deep-cycle gel battery. Simply plug into a standard outlet when in charging mode. And wrap and store the plug extension on the unit when in use.
Stabilizer Brake
When lowered into position, the integrated stabilizer / brake enables the ServerLift to securely hold up to 500 pounds (227 kg) on the side-shifting shelf tray (see Side Shifting Shelf for more information on the extended tray). It also facilitates safe and precise positioning of the server lifter in front of the rack.
Heavy-Duty Winch
For conformance with data center environmental requirements, the ServerLift uses a heavy-duty winch and cable assembly - not hydraulics or screw driver. The motorized winch safely and securely raises and lowers servers and peripheral equipment, directly addressing concerns of lifting and moving servers and other equipment
Side Shifting Shelf
The Serverlift's side-shifting shelf has been engineered to extend 6 inches (15 cm) toward the rack (in both directions). A multi-positioned locking lever is provided below the server lift's shelf. Just pull the locking lever and slide in the needed direction for added stability and placement.
|
